The SS Monsoon pump is capable of pumping up to 120 feet from ground level by simply
connecting it to a 12 volt battery. Its reliable design is suitable for continuous
purging of groundwater wells.
Simple to use and extremely powerful!
The SS-Monsoon is capable of pumping up to 120 feet from ground level to water level.
Simply, connect the pump connector to the Low Flow with Power Booster 2 'LCD' Controller,
then to a 12 volt battery, energizing the pump. Sound Simple? We think so.
For the harsh environments!
The SS Mini-Monsoon can operate under harsh conditions with higher turbidity. The
SS Mini-Monsoon has been installed in hundreds of remediation sites using pump and
treat systems.The SS Mini-Monsoon can also be used with solar panels for long term
Why choose the SS Monsoon?
Simple to use! Runs off any 12 volt DC batteries.
Lifts up to 120 feet deep from ground level to water level!
Reliable design is suitable for continuous sampling or purging of groundwater wells.
Low Flow Sample as low as 10 ML per minute, from any depth, when using the Low Flow
with Power Booster 2 'LCD' Controller and low flow control valve (Sold Seperately).
Easy to read LCD display conveniently placed on top of the Low Flow with Power Booster
2 'LCD' Controller makes adjusting and reading the discharge rate a breeze!
Computer engineered bottom debris filter screen allows operation under harsh conditions
with higher turbidity.
Long lasting, high performance pump motor lasts over 400 hours under normal working
Simple to clean and decontaminate!
The SS-Monsoon is only 1.82" OD and constructed of three high polished stainless
The replaceable motor module
The motor housing top connector
The outside pump housing
Should the motor fail, the field technician can change out the SS-Monsoon motor in
less than 30 seconds! And to start you off with; the SS-Monsoon comes complete with
one additional motor module. In essence, you will be receiving two pumps for the
price of one!
The main wear out parts consisting of the motor and seal all have been incorporated
in a single replaceable motor module. Should the existing replaceable motor module
fail in the field, a new replaceable motor module can quickly be installed within
60 seconds by a simple quarter turn twist! Once installed, your pump is essentially
new and will have a life span identical to a new pump.
Low Flow With Power Booster 2 'LCD' Controller
This Controller is specifically engineered for the SS-Monsoon. The Low Flow with
Power Booster 2 'LCD' Controller is constructed of a heavy duty steel casing. For
added safety, this controller is engineered with a reverse polarity protection circuitry
that incorporates a 30 amp fuse to protect the Controller and user.
The controller is also protected with a current limitation circuitry and thermal
overload protection. Easy to read LCD display conveniently placed on top of the Low
Flow with Power Booster 2 'LCD' Controller makes adjusting and reading the discharge
rate a breeze!
And, with the Low Flow With Power Booster 2 'LCD' Controller, the Field Technician
can control the water discharge all the way down to 10 ML per minute from 120 feet
or less when used with the low flow control valve.
Power consumption: 570 Watts (Max)
Volt recommendation: 12-15 At Source
Maximum amp output: 38 amps
Measurements: Length 7.5" / Diameter: 1.82"
Constructed: high polish stainless steel
Required tubing: 3/8" ID poly tubing can be used
Supplied with: 130 feet of heavy duty 12 gauge wire neatly rolled up on a tubular
metal reel with pump holder, 2 motor modules, disposable low flow control valve,